TEIN S.Tech Lowering Springs for Honda Civic Type R EP3

Transform the appearance and handling of your Honda Civic Type R EP3 with the TEIN S.Tech Lowering Spring Kit SKA12-S3B00.

Developed specifically for the 2001-2005 Honda Civic Type R EP3, the S.Tech kit provides a carefully engineered reduction in ride height that gives the Civic a more purposeful performance stance while retaining road-going usability.

According to TEIN UK’s official application data, SKA12-S3B00 lowers the EP3 Type R approximately 25mm at the front and 20mm at the rear. The spring rates are 5.5 kgf/mm front and 9.2 kgf/mm rear.

Whether you’re refreshing the suspension on a standard EP3 or building a fast-road Honda, TEIN S.Tech springs provide an effective upgrade without requiring a complete coilover conversion.

Improved Handling & Reduced Body Roll

Lowering the vehicle’s centre of gravity can help produce a more responsive feel through corners and reduce excessive body movement compared with a worn or completely standard suspension setup.

The S.Tech springs are engineered around the vehicle application rather than simply providing an extreme ride-height reduction.

For the Civic Type R EP3, this means a relatively moderate drop of:

Front: approximately -25mm
Rear: approximately -20mm

This gives the car a noticeably improved stance while maintaining useful clearance for normal UK road driving.

Designed Specifically for the EP3 Type R

This kit is not a generic Civic lowering spring set.

TEIN specifically lists SKA12-S3B00 for the:

Honda Civic Type R
Model Years: 2001-2005
Chassis: EP3
Engine Capacity: 2000cc
Drivetrain: FF / Front-Wheel Drive
Grade: Type R

For UK-market EP3 owners, this makes it an excellent direct application when selecting a dedicated TEIN performance spring setup.

Key Features

• Genuine TEIN S.Tech performance lowering spring kit
• Designed for the Honda Civic Type R EP3
• Fits 2001-2005 UK-market Type R
• Approx. 25mm front lowering
• Approx. 20mm rear lowering
• Front spring rate: 5.5 kgf/mm
• Rear spring rate: 9.2 kgf/mm
• Helps provide a lower, more aggressive stance
• Helps reduce excessive body movement
• Sharper performance-oriented suspension feel
• Ideal for road and fast-road EP3 builds
• Retains a sensible ride-height reduction for everyday use
• Excellent suspension upgrade for enthusiast-owned EP3 Type R models
• Genuine TEIN part number SKA12-S3B00

Technical Specifications

TEIN’s current UK application catalogue confirms the lowering figures, spring rates and free lengths above for SKA12-S3B00.

Why Upgrade Your EP3 With TEIN S.Tech Springs?

The Honda Civic Type R EP3 remains one of the UK’s most popular naturally aspirated hot hatchbacks, and suspension upgrades are among the most effective ways of improving both its appearance and road behaviour.

TEIN S.Tech springs give EP3 owners a balanced upgrade rather than an excessively low setup.

Sportier Stance

The approximately 25mm front and 20mm rear reduction closes the visual wheel arch gap and gives the Civic Type R a cleaner, more purposeful appearance.

Improved Cornering Feel

The lower ride height and performance spring rates can provide a firmer and more responsive suspension feel when the car is driven enthusiastically.

Suitable for Fast-Road Builds

For owners who don’t require height-adjustable coilovers, performance lowering springs offer a simpler suspension upgrade for road-focused EP3 builds.

Established Japanese Suspension Brand

TEIN is one of the best-known Japanese performance suspension manufacturers, with spring and damper systems developed for a huge range of Japanese and European performance vehicles.

Installation Note

TEIN specifies a bump-stop modification during installation of SKA12-S3B00:

Front: cut the bump rubber 25mm from the bottom and retain the upper portion.

Rear: cut the bump rubber 20mm from the bottom and retain the upper portion.

Professional installation is recommended.

After fitting lowering springs, it is also advisable to have the vehicle’s wheel alignment checked and adjusted.

Vehicle Compatibility

Honda Civic Type R EP3 – 2001-2005

• 2.0L petrol
• K20A2 engine
• EP3 chassis
• Front-wheel drive
• UK Type R application

Always confirm your vehicle’s chassis code and specification before ordering.

Package Contents

1 x TEIN S.Tech Lowering Spring Kit – SKA12-S3B00

Kit includes the required front and rear lowering springs for the vehicle application.

Ideal For

This TEIN lowering spring kit is ideal for owners searching for:

• Honda Civic EP3 lowering springs
• Civic Type R EP3 lowering kit
• TEIN EP3 springs
• Honda EP3 suspension upgrade
• EP3 fast-road suspension
• Civic Type R lowering springs UK
• TEIN S.Tech Honda Civic springs
• K20A2 suspension upgrades
• Honda Civic Type R performance suspension

FAQ

Do TEIN SKA12-S3B00 springs fit the Honda Civic Type R EP3?

Yes. TEIN lists SKA12-S3B00 for the 2001-2005 Honda Civic Type R EP3 2.0 UK/GBR application.

How much do TEIN S.Tech springs lower an EP3 Type R?

TEIN specifies approximately 25mm lowering at the front and 20mm at the rear for SKA12-S3B00.

What are the spring rates?

The official TEIN UK specification is approximately 5.5 kgf/mm front and 9.2 kgf/mm rear, equivalent to roughly 308 lbs/in front and 515 lbs/in rear.

Will these springs fit a normal Honda Civic EP3?

This SKU is specifically listed by TEIN for the EP3 Civic Type R. Do not assume compatibility with other EP3 variants without checking their exact application.

Should I get a wheel alignment after installation?

Yes. A wheel alignment check is strongly recommended after replacing or lowering suspension components.

Are modifications required during installation?

TEIN instructs installers to modify the bump rubbers for this particular application: approximately 25mm front and 20mm rear from the bottom, retaining the upper portions.

Is SKA12-S3B00 suitable for a road-going EP3?

Yes. The S.Tech line is categorised by TEIN as a street spring kit and provides a moderate reduction in ride height rather than an extreme drop.