Product Overview
ITG ProFilter HMP-660 – Volvo V40 II and V40 Cross Country 2.0 D3/D4 (2012 onwards)
The ITG ProFilter HMP-660 is a direct replacement for the paper panel filter in the standard air box of the second-generation Volvo V40 and V40 Cross Country with the 2.0 D3 or D4 five-cylinder diesel. ITG lists it for engine codes D5204T4 and D5204T6, rated at 150 and 177 bhp. It is hand-built in Britain from ITG’s multi-layer reticulated foam.
What it does
A foam element traps dirt through its full depth, so it holds more contamination before it starts to restrict flow. That makes it a sensible upgrade for drivers who want a filter they can clean and reuse rather than replace at every service. It also works as the base for further intake work, as the standard air box and sensors remain in place.
- Fits the factory air box with no modifications
- Multi-layer reticulated foam for airflow and filtration
- Can be cleaned and re-oiled many times
- Made in the UK by ITG
Specifications
HMP-660 is a shaped panel with a stepped profile, quoted by ITG at 325/205 x 185/125 mm. The same part number is also listed by ITG for other Volvo D3/D4 and D5 models, such as the C30 and S40 II/V50, so check the full list on the ITG HMP-660 product page if you run a different Volvo.
Fitting and care
Release the air box lid, lift out the old element and wipe out any debris. Seat the ProFilter so the edges sit evenly in the housing groove before closing the lid. ITG foam is supplied ready to use and must stay oiled to filter properly, so clean and re-oil it with ITG’s recommended products when it becomes dirty. Petrol V40 models use a different ITG filter, so confirm your engine before ordering.
