Product Overview
Bola B2R Alloy Wheel 858C40MBRBWB2R 18×8.5 5×118 ET40-45 Matt Bronze
The Bola B2R takes a classic motorsport-inspired spoke design in a design that suits everything from hot hatches to lowered vans. This listing is for a single 18×8.5 inch wheel in matt bronze, drilled to the 5×118 stud pattern, with an offset range of ET40 to ET45 and a 72.6mm centre bore.
Specification
- Diameter and width: 18 x 8.5 inch
- PCD: 5×118
- Offset: ET40 to ET45
- Centre bore: 72.6mm
- Finish: matt bronze
- Bola part number: 858C40MBRBWB2R
Bronze wheels work particularly well against white, black, grey and blue paintwork, and the matt finish hides brake dust better than a gloss finish between washes.
Fitment notes
A 5×118 PCD is less common than 5×112 or 5×120, so confirm your vehicle’s stud pattern, hub bore and the offset you need before ordering. Where your hub is smaller than 72.6mm, a hub-centric spigot ring of the right size should be used so the wheel centres on the hub rather than on the studs or bolts. Check brake caliper clearance with 18 inch wheels, and make sure the tyre size you choose keeps the speedometer accurate and the load rating suitable for your vehicle. Aftermarket wheels usually need tapered-seat nuts or bolts rather than the flat-seat fixings used on many factory wheels, so check the fixings before fitting. You can browse more styles and sizes in our alloy wheels range.
Fitting advice
Have the tyres mounted and balanced by a tyre fitter, using stick-on weights on the inner barrel to keep the spokes clean. Fit with the correct fixings, torque to your vehicle maker’s figure with a torque wrench rather than an impact gun, and re-check the torque after the first 50 miles.
