Hardrace Wheel Lug Nuts — M12 x 1.5, 45mm, Open-End, 60° Conical Seat (20pcs)

This Hardrace wheel lug nut set gives you a full 20-piece pack of M12 x 1.5 thread lug nuts, ideal for anyone fitting aftermarket wheels, replacing worn or damaged studs, or simply wanting a fresh, matched set across all four corners. Each nut features a 60° conical (tapered) seat, which is the standard seat type for a wide range of aftermarket and OEM wheels, and an open-end design that accommodates longer wheel studs — useful when running spacers or aftermarket wheels with a deeper offset.

Supplied as a set of 20, this pack covers a full 5-lug wheel setup (4 nuts x 5 = 20), so you get everything you need in one order without buying multiple smaller packs.

Key features:

• Thread size: M12 x 1.5
• Length: 45mm
• Open-end design — suits longer studs, including wheel spacer applications
• 60° conical (tapered) seat — the common seat type for most aftermarket wheels
• Supplied as a set of 20 (covers a full 5-lug wheel setup)

Fitment:
Universal fitment for wheels/hubs using an M12 x 1.5 thread with a 60° conical seat. Always double-check your wheel’s thread size and seat type before ordering, as an incorrect match is a safety issue — contact us if you’re not sure which spec your wheels need.

Installation note:
Wheel lug nuts should be torqued to your vehicle manufacturer’s specification using a calibrated torque wrench, and re-checked after the first ~50 miles of driving. If you’re also running wheel spacers, confirm stud length is sufficient for full thread engagement before fitting.