Product Overview
Turbosmart Kompact EM Plumb Back VR19 TS-0223-1282 – Ford EcoBoost / Ranger Raptor
Many modern turbo engines use an electronic diverter valve controlled by the engine ECU to release boost when the throttle closes. The factory valves are often plastic and can start to leak boost once the engine is tuned. Turbosmart’s Kompact EM range replaces them with a billet aluminium valve that keeps the factory ECU control, and the VR19 is the version for Ford’s EcoBoost family.
Features
- Plug-and-play replacement for the factory electronic diverter valve
- Controlled by the standard ECU, so OE calibration strategies are kept
- Boost-Balance design that seals better as boost rises
- Viton O-ring on the piston face and high-temperature O-rings
- Billet aluminium body with integrated high-temperature solenoid
- Plumb back (recirculating) – no extra hoses or adaptors needed
Supplied with the valve, three M6 fasteners, three Torx-head plastic screws and a Turbosmart decal.
Fitment
Turbosmart lists the VR19 for Ford EcoBoost 2.0, 2.3, 2.7 and 3.0 litre platforms, including the 2022-on Ford Ranger Raptor and the Bronco, Bronco Sport and Maverick from 2020. Because the valve type varies between EcoBoost engines and markets, please compare your existing valve or send us your registration before ordering. Turbosmart’s details are on the Turbosmart Kompact EM VR19 product page.
Fitting advice
Fit with the engine cold. Unplug the factory valve, remove its fixings and swap in the Turbosmart unit, reusing the factory Torx screws where appropriate. Route the wiring so the solenoid and loom cannot rub or pull. The valve is usually more audible than the original and may briefly open during gear changes or traction control intervention, which Turbosmart says is normal. Smoke testing the intake is not recommended with this valve; use a vacuum test instead.









