Product Overview
KAAZ 1.5-Way Centre LSD DBM2070 – Mitsubishi Lancer Evolution IV-VI CN9A / CP9A 1996-2001
The DBM2070 is KAAZ’s centre limited-slip differential for the five-speed manual Lancer Evolution IV (CN9A) and Evolution V and VI (CP9A) GSR and RS. It replaces the factory viscous coupling in the centre of the drivetrain with a mechanical, clutch-plate unit, giving a far more direct and consistent split of drive between the front and rear axles. KAAZ also lists the same unit for the Lancer CM5A GSR.
How It Works
This is a 1.5-way design, meaning it locks strongly under power and more gently on the overrun, which helps the car stay stable on turn-in while still putting the power down hard on exit. The unit uses 12 friction plates, which KAAZ pitches at medium power levels. It leaves the factory at full preload and reacts quickly, a setting KAAZ recommends for dry circuit use; the locking effect can be softened by rearranging the plates, provided both sides are set up identically and the original plate count and Belleville springs are retained.
- 1.5-way centre LSD, replaces the viscous coupling
- 12-plate configuration
- Adjustable locking via plate arrangement
- Optional SuperQ version with WPC-treated plates for smoother engagement
Important Fitment Notes
According to the KAAZ USA DBM2070 centre differential page, this centre unit only works in combination with a KAAZ front differential (DBM2060, sold separately), so plan the two as a pair. It suits manual GSR and RS models only; it is not for automatic cars. Check your gearbox and existing differential setup before ordering, as some Evolutions have had drivetrain parts swapped over the years.
Fitting Advice
Fitting requires the transfer case and gearbox to be removed and stripped, so this is a specialist drivetrain job. Use the correct gear oil and LSD additive as recommended by KAAZ, and follow a gentle running-in period unless you have chosen the SuperQ version, which KAAZ says needs no break-in.








