Product Overview
Tegiwa GT4 Style Pre-Preg Carbon Front Splitter T-M4-SPLITTER-CF-KIT β BMW M4 F82 / F83 2014-2020
This is Tegiwa’s GT4-inspired front splitter for the F8X-generation BMW M4. It takes its cue from the splitter fitted to Tegiwa’s own M4 endurance race car, where it is used to add front downforce and to feed cooling air straight to the brakes. It suits drivers who want a more purposeful look on the road, or who regularly take their M4 on track.
Construction and design
Rather than a carbon skin over a fibreglass or plastic core, the splitter is produced fully in pre-preg carbon fibre. Pre-preg material is cured under controlled heat and pressure, which gives a stiff, consistent part with a high-quality finish while keeping weight down compared with a typical moulded bumper lip.
- Full pre-preg carbon fibre construction
- GT4 race-car inspired profile
- Integrated ducting to direct air to the front brakes
- Supplied as a kit with what Tegiwa states is needed for fitting
Fitment notes
Tegiwa lists the splitter as suitable for all M4 front bumpers, with UK retailers listing it for the F82 M4. Be aware that some trimming of the bumper may be required to achieve a proper fit, so this is not a purely bolt-on part for every car. If your M4 has an aftermarket or modified front bumper, please check with us before ordering. Tegiwa also notes that the splitter may need up to a week of preparation before dispatch.
Fitting advice
Because the bumper may need cutting, we recommend having the splitter fitted by a body shop or an experienced specialist. Trial-fit the part before making any cuts, check ground clearance on ramps and kerbs, and confirm the brake ducts line up with the cooling path on your car. Full product information is available on the Tegiwa M4 GT4 style carbon front splitter product page.











