Product Overview
King Racing XP Conrod Bearing Set CR4440XP0.25 – Ford 2.0 OHC Pinto / Cosworth YB, 0.25mm Undersize
The CR4440XP0.25 is a set of King Racing XP series connecting rod (big-end) bearings for the Ford 2.0 OHC Pinto engine family, the unit found in cars such as the Cortina 2000 XL, and its Cosworth YB derivative. This version is the 0.25mm size, intended for a crankshaft whose rod journals have been reground 0.25mm undersize, so the shells are correspondingly thicker than the standard part. It is a sensible choice for a fast road, rally or circuit rebuild where the bottom end is going to be worked harder than Ford ever intended.
XP Series Construction
King’s XP race bearings use a tri-metal build: a steel back, a copper-tin intermediate layer and King’s pMax Black overlay, bonded using the company’s Securebond micro-etch process to improve adhesion between layers. The aim is higher load capacity and better fatigue resistance than a conventional bi-metal shell, which matters once an engine is seeing higher revs, more boost or sustained competition use.
- Connecting rod (big-end) bearings, not main bearings
- 0.25mm undersize to suit a reground crankshaft
- Tri-metal construction with pMax Black overlay
- Set for a four-cylinder engine
Fitment Notes
King lists CR4440XP against the Ford 2.0 DOHC 16v YB in its King Racing application guide (PDF), and King-catalogue data also lists the same part for the Cortina 2000 XL engine, as both share the Pinto bottom end. Always measure the crank journals with a micrometer before ordering: only choose 0.25mm if the crank has actually been ground to that size. Matching main bearings (MB5672XP in the King range) and thrust washers are sold separately.
Fitting Advice
Bearing installation is a job for an experienced engine builder. Check running clearances with Plastigauge or bore gauges once the rods are torqued to the manufacturer’s figure, lubricate the shells with assembly lube and prime the oil system before first start-up. Use new rod bolts where the engine maker specifies them.












