Product Overview
Tegiwa FRP Front Bumper Canards T-4099009 – Honda Civic Type R FN2 2007-2011
Canards, or dive planes, are a classic track-car addition. Fitted to the corners of the front bumper, they help push the nose of the car down at speed and give the front end a purposeful, motorsport look. Tegiwa makes these FRP (fibreglass reinforced plastic) canards specifically for the Civic Type R FN2, so the shape follows the contours of the bumper rather than being a one-size-fits-all part.
Features
- Made specifically for the Civic Type R FN2 front bumper
- Manufactured in the UK by Tegiwa
- FRP construction
- Supplied fully assembled with mounting tabs
- Extra front-end downforce, especially noticeable in the wet
Tegiwa says the extra downforce is most noticeable in wet conditions, where front-end grip is hardest to find. They also suit time attack, sprint and track day cars where front aero is often added to balance a rear wing.
Fitment
Tegiwa lists these canards for the Honda Civic Type R FN2 built from 2007 to 2011 and they are shaped for its standard front bumper. Tegiwa supplies the canards ready to fit with mounting tabs, but the rivets or screws needed to attach them to the bumper are not included. If you want the canards to match your paintwork, allow for painting or wrapping them before fitting. Tegiwa’s own listing is on the Tegiwa FRP bumper canards page.
Fitting advice
Offer the canards up to the bumper and check both sides sit at the same height and angle before marking any holes. Drill small pilot holes, deburr them and fix the mounting tabs with suitable rivets or screws and washers. Check ground clearance on kerbs and ramps afterwards, and inspect the fixings regularly if the car is used on track. Canards can affect pedestrian-safety rules on road cars, so consider your own use before fitting.











