Product Overview
SuperPro Control Arm Lower Inner Rear Bush Kit SPF3172K – Suzuki Swift ZC11 / ZC21 / ZC31S
The rear inner bushes on the Swift’s front lower arms take most of the braking and cornering load, and once the original rubber softens the car starts to wander under braking and the steering loses its crispness. SuperPro’s SPF3172K replaces them with polyurethane bushes and, thanks to a double offset design, also moves the arm to add positive caster on both sides of the car.
Why fit it
- Double offset design adds around +0.5 degrees of caster
- Better straight-line stability and steering self-centring
- SuperPro engineering-grade polyurethane, unaffected by oil, water or temperature
- Longer service life than the original rubber
- Designed and made in Australia
It is an ideal companion to the matching anti-roll bar bushes listed below, and our bushes and mounts range covers other chassis rubber that tends to wear at the same time on older Swifts.
Fitment
The kit suits the third-generation Swift: the 1.3 (ZC11) and 1.5 VVT (ZC21) from January 2005 and the Swift Sport ZC31S from September 2005. It is not for the later ZC32S or ZC33S Swift Sport. Full details are on the SuperPro SPF3172K product page.
Fitting advice
SuperPro recommends fitting by a suspension specialist and allows about three hours. The old bushes have to be pressed out of the lower arms and the new ones fitted with the supplied grease on all metal contact faces. Tighten the arm bolts with the car at normal ride height, then book a front wheel alignment, which SuperPro lists as required for this kit.














