Product Overview
SuperPro KIT5336CAK Front Control Arm Bush Kit β Skoda Fabia Mk2 2011-2014 & VW Polo 6R
On a well-used Fabia vRS or Polo the factory rubber bushes in the front lower arms soften and split, letting the arms move under braking and power. That shows up as vague steering, tramlining and clunks over bumps. This SuperPro kit replaces both inner bush positions on each arm with polyurethane, restoring precise location while keeping standard geometry.
What’s in the kit
- SPF1915K β lower arm inner front bush kit (30mm): two polyurethane bushes and two steel tubes
- SPF3395K β lower arm inner rear bush kit, standard alignment: six polyurethane bushes, two steel tubes, two sleeves and instructions
Why polyurethane
Polyurethane resists deflection far better than rubber and doesn’t perish in the same way, so the arms stay put under load and the car feels tighter on turn-in and more stable under braking. SuperPro designs its bushes to keep noise and vibration close to standard, making this kit a sensible road upgrade as well as a track-day fix. You’ll find further options in our bushes and mounts category, with the wider suspension upgrades range covering springs and coilovers.
Fitment
SuperPro lists this kit for the Skoda Fabia Mk2 2011-2014 (facelift, including vRS and Scout), VW Polo 6R 2009-2017, SEAT Ibiza 6J 2008-2015, Audi A1 8X 2010-2018, and the VW up!, Skoda Citigo and SEAT Mii. Earlier 2007-2010 Fabia Mk2 cars use different parts. See the SuperPro Fabia control arm bush range for alternatives, including caster-increasing kits.
Fitting advice
SuperPro rates the job 3 out of 5, at around three hours. The arms need to come off the car and the old bushes pressed out, so a hydraulic press or suitable bush tool is essential. Grease all bushes before assembly, tighten pivot bolts with the car at ride height and book a wheel alignment afterwards.









