Product Overview
Tegiwa Carbon Fibre OEM Bonnet T-C-OEM-DC5 for Honda Integra Type R DC5 (2001-2006)
This Tegiwa bonnet follows the DC5 Integra’s factory shape exactly, so it sits flush with the original wings, grille and headlights while swapping the painted factory panel for exposed carbon weave. It is a popular choice for owners who want to take weight off the nose of their K20-powered Integra without the vents of a more aggressive race-style bonnet.
Weight saving and construction
Tegiwa quotes a saving of 2.8 kg over the original bonnet, removed from the very front of a front-wheel-drive car where it makes the most difference to turn-in. Each bonnet is hand-made from what Tegiwa describes as Grade A carbon fibre sourced from Japan and finished in a high-gloss coating with UV protection to help prevent sun fade.
- OE shape and panel gaps
- Pre-drilled, threaded holes for the factory hinges
- Latch fitted to work with the original catch
- 2.8 kg lighter than standard (Tegiwa figure)
The full listing is on the Tegiwa Integra DC5 carbon bonnet product page.
Fitment notes
Tegiwa lists this bonnet for the Honda Integra Type R DC5, which was built from 2001 to 2006. Tegiwa does not say whether it covers both the original and the 2004-on facelift cars, nor whether it suits the closely related Acura RSX, so please contact us with your car’s details if you are unsure.
Fitting advice
With a helper supporting the panel, undo the hinge bolts and remove the original bonnet, then transfer the washer jets and any seals. Offer the carbon bonnet up, nip the bolts loosely and adjust for even gaps before tightening fully. Check that the latch engages properly and the safety catch holds before driving. Lower and press the bonnet shut rather than dropping it, and keep the gloss protected with a gentle shampoo and a quality wax or sealant.










