Product Overview
H&R Performance Lowering Spring 28833HA2 – Rear, Multi-Link Axle (Pair)
H&R is a German spring specialist whose performance lowering springs are fitted to thousands of road cars across Europe. 28833HA2 is a pair of individual rear springs, sold as replacement units for an H&R lowering kit. The HA marking is H&R’s code for the rear axle, and this spring is designed for a multi-link rear suspension with a lowering of approximately 40 mm.
Why buy replacement springs?
If one spring from an existing H&R kit has been damaged, corroded or lost, or you are rebuilding a car that already runs H&R springs, buying the correct component part keeps the ride height and spring rate consistent side to side. Springs should always be replaced in axle pairs, which is why this listing supplies two.
- Rear axle (HA) springs for a multi-link rear suspension
- Approximately 40 mm lower than standard
- High-tensile spring steel
- Protective powder-coat finish
- Supplied as a pair
Identifying the right spring
H&R explains that the number on the kit box is the product part number, while the numbers printed on each spring are component part numbers, and that springs marked HA are rear springs. Read the markings on your existing springs or check your kit paperwork to confirm 28833HA2 is the part you need – H&R’s H&R technical FAQ explains the marking system. Lowering amounts are approximate and vary with the car’s specification and equipment.
Fitting advice
Fitting springs requires the correct spring compressors and should be carried out by a competent mechanic or garage. Inspect the dampers, top mounts and spring seats while the suspension is apart, as standard dampers can be worn or unsuited to lower springs. Have the wheel alignment checked after fitting, and the headlamp aim if needed. Browse our suspension range for dampers and other parts to complete the job.











