Product Overview
SuperPro Front Shock Absorber Lower Bush Kit SPF3259K – Mazda MX-5 NC / RX-8
On the MX-5 NC and RX-8 the bottom of each front damper bolts into a bush in the lower control arm. As the rubber ages, the damper can move before it starts to control the wheel, blunting the sharp turn-in these cars are known for and sometimes causing knocks over broken surfaces. SuperPro’s SPF3259K replaces those bushes with polyurethane so the damper is held firmly and reacts straight away.
Benefits
- Firmer location of the front damper
- More immediate damping response and turn-in
- SuperPro polyurethane, unaffected by oil, water or temperature
- Longer life than the original rubber
- A sensible refresh when fitting new dampers or coilovers
Because the dampers have to come out anyway, many owners fit these bushes at the same time as lowering springs or a coilover kit. Our bushes and mounts range has other SuperPro parts to refresh the rest of the chassis.
Fitment
The kit fits the front axle of the Mazda MX-5 NC (2005-2015) and the Mazda RX-8 (2003-2012), which share their front suspension design. It is not for the NA, NB or ND MX-5. See the SuperPro SPF3259K product page for the official details.
Fitting advice
SuperPro allows about three hours and recommends a suspension specialist. The old bushes must be pressed out of the lower arms, and the new ones fitted with the supplied grease on metal contact faces. Tighten the damper bolts with the car at ride height and have the alignment checked afterwards.














